ROCKY MOUNTAIN CLOCKS

The enduring appeal of this clock is in its magnificent presentation. The entire presentation weighs an astounding 17 pounds and measures 10 inches in diameter overall by 4 inches deep. It is in excellent running condition and is a good time keeper, striking the ships bell sequence properly with a clear sonorous tone. It is in excellent, virtually perfect cosmetic condition, after 45 years! Complete with original Chelsea-marked brass winding key. One of the finest early aneroid barometers we have had the pleasure of offering. This handsome 3rd quarter 19th century example has a large open face dial of classic proportions. This lovely example has not one but two thermometers! On the left is a curved red alcohol thermometer with double scales. This instrument is housed in its highly polished bronze case with original lacquer finish.

Buy and sell antique ansonia royal bonn art nouveau womans head porcelain mantle clock products

Stories about clocks, time, folklore, the whys and hows of time keeping and restoration. However the one thing we know about the Attleboro Clock Co. As of January 1, , clocks produced by the Waterbury, Ansonia, E. The two most common Attleboro Clock Co. Ingraham and Ansonia, with the Waterbury oak case being the most common.

Buy online, view images and see past prices for Ansonia Timber Mantle Clock (Hcm). Invaluable is the world’s largest marketplace for art, antiques, and collectibles. Ansonia Timber Mantle Clock (Hcm) We use cookies to understand how you use our site and to improve your experience. This includes personalizing content and advertising.

Guide to Antique Mantle Clocks By Terry Hurley Collector and Antique Store Owner Gracing fireplace mantles and shelves for more than two hundred and fifty years, antique mantle clocks range in design from highly ornate to stylishly sleek. Mantle Clocks Made small enough to set on a fireplace mantle or shelf, these clocks are key wound and run from thirty hours to eight days, depending on the specific clock. Also known as shelf clocks, the clock’s movement was made of brass or wood.

Similar to many antique wall clocks , they have a swinging pendulum. However, the positioning of the clock movement is different from that of a wall clock. The movement of a wall clock is set in an upward position on the clock’s backboard; however, the movement in a mantle clock is made to lie horizontally on the clock’s base, also called the seat board. Early Styles Originating in France in the mid eighteenth century, the early French clocks for mantles were typically very ornate and highly decorative to match the furniture styles of the day.

Many were decorated with small angels, cherubs and other angelic type figures. This style of clocks is sometimes called a cherub clock. These early French clocks were made of a combination of materials including gilt metal, wood and porcelain. The most popular gilt metal of the time, ormolu, was made of ninety-three percent bronze and seven percent gold.

Shelf / Mantel Clocks

We also periodically buy collections of clocks from those who used to repair them professionally or as a hobby. Many of these clocks need a great deal of work to prepare them for resale. We do our best to make them both attractive and functional and yet keep the cost of the clocks in an affordable price range for our customers.

how to adjust an antique clock Mechanical clocks are inherently inaccurate and therefore cannot be compared to electronic clocks. People have to keep in mind that .

Automatic synchronisation of the chime You’d probably do well to bookmark this page so that you can return to it again later but if you’ve bought your clock from me, I usually include a hard copy of some instructions specific to each clock when I pack it. Before fitting the pendulum, decide where to display it. Carriage clocks are like mechanical watches in that they have a balance wheel platform escapement and so will run in any position, even lying on the back seat of a car they were designed for travelling so they can tolerate movement.

Any clock with a balance wheel is easily identifiable as, unlike the rest below, they have no pendulum. All these clocks are easy to site but avoid window ledges – if the sun doesn’t harm any woodwork first, one day you might find it has been stolen. Also avoid side tables which get knocked and any low position on a level with wagging tails and young inquisitive fingers.

Mantel clocks with a pendulum on the other hand like rigidity, especially day clocks. And they don’t like vibration.

Antique Mantel Clocks

Hi Bob, I would surmise January, 8 but that may be too obvious. Have you researched your clock in the Sessions book or even Welch? Hassinger Courtney Auctioneering, Auction:

Your search has returned 44 results. Junghans Eight-day Wall Clock, Seven Cast Metal Novelty Clocks, by Ansonia, New Haven, Junghans, and other manufacturers, all with one-day lever movements, three putti figurals, a Junghans with an inset porcelain panel.

Dating ansonia mantle clock Minute and hour strikes as well although it may need some adjustment as it was last serviced in The glass is all there but one side piece seems too small and. Phelps supplied brass to Connecticut manufacturers until , when he joined forces with two powerful clockmakers, Theodore Terry and. The decorative pieces have wear to the finish.

The top is dented and the corner rods that hold the finials are bent. Comes with original key. Large and heavy clock case all spelter metal. Antique Ansonia Clock Co. This Year Old working artifact is entitled Rosalind. But checks out and should be enjoyed for many more generations. I wound it and it’s running and striking.

Comes with key and has been checked out by non expert lol. You can place sturdy Ansonia clocks anywhere in the home with dating ansonia mantle clock fear of damage.

Antique Ansonia Pendulum Mantle Shelf Clock Reverse Painting of Ducks c. 1878

It is the buyer’s responsibility to be knowledgeable about the condition of the property before bidding. This is a live auction, and the buyer is advised to inspect the items in person during the week prior to the auction. As a courtesy, One Source Auction makes condition reports available prior to the auction.

The absence of a condition statement DOES NOT imply that the lot is in perfect condition or completely free from wear and tear, imperfections or the effects of aging. No statement regarding condition, kind, value, or quality of a lot, whether made orally at the auction or at any other time, or in writing in this catalog or elsewhere, shall be construed to be an express or implied warranty, representation, or assumption of liability.

One Source Auction does not guarantee the validity of the Certificate of Authenticities provided.

Connecticut was home to multiple clockmaking companies in the 19th century, such as Ingraham, the William L. Gilbert Clock Company, Seth Thomas, Waterbury Clock Company, and, of course, Ansonia Clock Company’s roots lie in the Ansonia Brass Company, founded by Anson Greene Phelps in

Parkside House Antiques specializes in clocks of American, English, French and Scottish origin with an emphasis on tall case clocks. All of our clocks run fine and many are original clock-maker signed and dated. While the dial is original to the case, the movement was likely a 30 hour changed current c. The clock runs fine and looks good. Measures 85″ tall, 19″ wide.

The form is American so I’m going with that. Measures 94″ high, 19″wide, 9″ deep. Runs and strike fine. Measures 80″ x 18″ x 10″. Neill is listed in Belfast and died in A repaired swan neck and replaced fee.

Mantel Clocks

Mantle clocks have a clock face, sometimes encased in glass, but often times exposed. Throughout the years, the outside of the clock around the face can get dirty, and the inside mechanisms may need to be cleaned and repaired. Some minor adjustments to an antique clock will keep it running smoothly for many years. Turn the mantle clock around, and open up the back.

Examine the gears, bushings and pivots. Check to see if the movement and other parts are working efficiently.

When clock owners approach their cherished chronometer, they can feel a bit worried about breaking the delicate machinations. This is the basis for this clock myth that .

Don’t worry — your e-mail address is totally secure. I promise to use it only to send you Clock Collecting Tips. There are so many styles and types of clocks, made by so many clock makers and from so many countries, that I was totally lost. Over many years, I have learned a lot. I have concentrated on the American clock companies for my collection, so there is much for me to learn about clocks from outside the US.

The question I get most from the comment form on this web site is: Some people will see a clock at an antique store that would look good in a certain room of their house, and end up with it that way. However you might end up with your special clock, you probably would like to identify, date and generally learn more about it.

This clock forum page may be able to help. You can post your clock here for other visitors to see.

Ansonia Marble Chime Clock

If this item contains incorrect or inappropriate information please contact us here to flag it for review. Clock features a black enameled iron body with an awesome ornate gold tin face. Also two columns on eachside of the face and great gold accents on the clock.

This’s is Ansonia’s “La Duchesse” cast iron mantle clock. The clock has been running and chiming without issue. The dial, bezel, and hands appear to be original. Works .

It is perhaps best known for a series of unusual variants such as figurine clocks and swing clocks. It also produced statue clocks, black iron mantel clocks and china cased clocks. For a time Phelps supplied brass to several Connecticut-based watchmakers. Andrews and Theodore Terry. He would supply the two with cheap brass materials in exchange for half of the total shares of their highly successful Bristol based clock making business. This partnership paved the way for the formation of the Ansonia Clock Company in Ansonia clocks are mostly eight day movements and only need to be wound once every week.

In , Ansonia came up with a new type of clock which lights up whenever it alarms. This hour spring driven alarm clock had a walnut case and used a match-wick mechanism. Ansonia produced a wide array of clocks including miniature ogee shelf alarm clocks, beehive shelf clocks, regulator clocks, and mantel clocks in intricate china cases. Ansonia was also known for its novelty products, such as swinging clocks that featured figurines.

Ansonia however was able to quickly bounce back and in the same year built a new factory in the same site where its original New York factory once stood.

dating mantle clock

Home Decor How to Identify a Vintage Thomas Mantel Pendulum Clock Famous American clockmaker Seth Thomas began his career as an apprentice to renowned clockmaker Eli Terry in , but by , he had purchased the clock factory from Terry and had begun producing his own clocks. Identifying a vintage mantel pendulum clock by Seth Thomas is sometimes difficult since he often hid the pendulum behind a small wooden door or delicately painted glass.

Thomas started making shelf and mantel clocks in with pillar and scroll cases and a scene painted on the bottom third of the case.

Bronze French Victorian Figural Clock Signed Porcelain Dial Patinated White Metal statue of a woman with the foundry marks Fabrication Francaise Paris, made in Paris France. This was a foundry in Paris which poured French bronzes and iron work in the late 19th Century, early 20th Century, dating these pieces circa Stands approximately

History[ edit ] In , brass movements had mainly replaced wooden and cast iron movements in most clocks due to the volumes of supply of rolled brass. In , metal dealer Anson Greene Phelps formed the Ansonia Brass company in Connecticut, to supply the expanding clock business – nine companies were producing clocks in Connecticut. Phelps decided to get into the clockmaking business to expand the market for his brass, while Terry and Andrews got access to better quality brass at better prices.

Expansion[ edit ] In the clock company purchased a factory in New York, and moved most of its production there after being spun off from the brass company. Davies of Brooklyn, himself a clockmaker, inventor and case designer, joins the newly reconstituted company as one of its founders. As President, he is thought to be largely responsible for the figurine clocks, swing clocks and other unusual and desirable novelties for which the Ansonia firm became known.

Thomas Edison visited the factory in to experiment combining clocks with his newly developed phonograph.

MOV 3852 ansonia mantle clock